Tablecloths
washable, re-usable covers
Branded table cloths are quick win for any corporate event or exhibition stand.
Polyester Tablecloths are printed via a process of dye-sublimation which uses special inks. The cloths undergo a post-print heating process to ‘fix’ the ink into the fabric, which makes it both scuff-resistant and washable.
- Printed on 210gsm Display Polyester
- Finished with a standard 10mm hem all around
- Dye-sublimation printed for vibrant colours and images
- M1/B1 fire-rated to comply with UK and European fire safety standards
Check our our guide to ordering printed tablecloths below and call us for further advice and prices.
Tablecloth Drop Length
You will need to know the amount of ‘drop length’ (also known as ‘overhang’) required from the edge of the table. This is the amount that the printed tablecloth will hang from the edge of the table down to the floor.
For most situations, and especially where people will be sitting at a table, a 150mm to 200mm drop length is fine. For a longer drop length, such as the front of a table at a convention or expo, we recommend going much closer to the floor. The greater drop length grants more privacy as well as a larger area for branding.
For certain situations, a short drop length may be required at the back of the table, while a full-height drop length is required for the front and sides. Please bear this in mind when calculating your tablecloth size.
To determine the size of a rectangular tablecloth to order, you will first need to know the length and width of the table for which it will be used, as well as the drop length required. The height of the table is not strictly necessary, but will be needed if you would like the tablecloth to reach the floor.
Assuming a consistent drop length of 150mm around the whole table:
- Take the drop height and multiply it by two (e.g. 150mm × 2 = 300mm). This will be your ‘drop addition’.
- Take the table length and add the ‘drop addition’ from above (e.g. 2000mm + 300mm = 2300mm). The finished length will be 2300mm.
- Take the table width and add the ‘drop addition’ from above (e.g. 1000mm + 300mm = 1300mm). The finished width will be 1300mm.
- The finished size to order will be 2300mm × 1300mm.
To determine the size of a circular tablecloth to order for a circular table, you will first need to know the diameter of the table for which it will be used. The height of the table is not strictly necessary, but will be needed if you would like the tablecloth to reach the floor.
Assuming a consistent drop length of 150mm around the whole table:
- Take the drop height and multiply it by two (e.g. 150mm × 2 = 300mm). This will be your ‘drop addition’.
- Take the table diameter and add the ‘drop addition’ from above (e.g. 1500mm + 300mm = 2800mm).
- The finished size to order will be 2800mm × 2800mm.
You may also be interested in…
